Need help?Do you have a question about the Akai MPC2500 and is the answer not in the manual?
General| Polyphony | 32 voices |
|---|---|
| Sampling Rate | 44.1 kHz |
| Bit Depth | 16-bit |
| Pads | 16 velocity-sensitive MPC pads |
| Sequencer | 100, 000 note capacity, 64 tracks |
| Effects | 2 master effects |
| Storage | CompactFlash (CF) card slot |
| MIDI | 2 MIDI In, 4 MIDI Out |
| Operating System | MPC OS |
| Display | 240 x 64 pixel LCD |
| Power Supply | 100-240V, 50/60Hz |
Describes the cursor and how to move it on the screen using the panel keys.
Explains fields as locations for settings and the DATA wheel for changes.
Details the six function keys and their dynamic relevance to the LCD display.
Identifies the primary screen for recording and playback operations.
Explains how to switch modes by pressing the MODE key and a pad.
Describes the WINDOW key's function to open detailed setting windows for fields.
Guides users on how to play the pre-loaded demo song on the MPC2500.
Instructs on playing pre-programmed sounds using the MPC2500 pads.
Details how to erase specific recorded pad performances without affecting others.
Explains how to choose subsequent sequences during playback.
Describes using SONG mode to arrange sequences for playback.
Outlines steps to connect audio sources and set up for recording.
Details the process of initiating and managing the audio recording session.
Explains how to map recorded audio samples to MPC pads.
Guides on setting sample start/end points for rhythmic looping.
Explains how to match sequence length to sample length.
Details matching sequence tempo to sample tempo for synchronization.
Describes sample division and tempo-flexible playback features.
Explains entering and editing pad events using a graphic matrix editor.
Details using built-in effects and LFOs synchronized to sequence tempo.
Describes recording and reproducing mixer parameter changes over time.
To Next Page
