8
MPC2500 Quick Manual
Recording to a sequence
To loop the phrase with the sequence function, proceed as follows.
01. Press the [MAIN] key to display the MAIN page.
02. In the Sq field, select a sequence that says “unused”,
03. In the Pgm field, select the track that you assigned the recorded sample to.
You can record the sequence in real time by pressing the [PLAY START] key while pressing the [REC] key, but here, we
will enter an event with the step recording in the STEP EDIT mode to play the phrase at the beginning of the sequence.
04. Press the [MODE] key and then the [PAD 14] (STEP EDIT).
In the STEP EDIT page, the performance data of the pad will be listed.
05. Turn the DATA wheel to select “001.01.00”.
06. Press the [OVER DUB] key.
The LED of the key will be lit, that indicates that you are in STEP EDIT mode.
07. Hit the pad that has a phrase sample.
The event of this pad will be entered at the point of 001.01.00.
If you hit a different pad by mistake, press the [F4] (DELETE) key. The entered event will be deleted.
08. Press the [STOP] key.
This deactivates the STEP EDIT mode.
Setting the same number of the bars for the sample and the sequence
A new sequence is set to 2 bars in default. If the recorded phrase is also 2 bars, there is no problem. However, if the
number of the bars of the phrase is different from that of the sequence, you need to adjust the number of the bars of the
sequence to match that of the phrase.
09. Press the [MAIN] to display the MAIN page.
10. Select the Bars field and press the [WINDOW] key.
The Change Bars window will be displayed. Set the number of the bars in the New bars field, and press the [F5] (DO
IT) key. This closes the window and changes the length of the sequence.
Setting the same tempo for sample and the sequence
Finally, you need to set the same tempo for the sample and the sequence.
11. Press the [PLAY START] key to play back the sequence.
12. In the (tempo) field, adjust the tempo of the sequence.
If the end of the phrase overlaps the beginning of the next phrase, set the tempo slower (smaller value), if there is
silence part between phrases, set the tempo faster (greater value).
To Next Page
Loading...
Need help?
General
