27
MIDI CHANNEL FIELD
EDITING THE PITCH BEND WHEEL
The Pitch Bend wheel can be assigned to transmit pitch bend information on a specific MIDI Channel.
1. Press the [EDIT] button to enter Edit Mode.
2. Now select the Pitch Bend wheel for editing by moving the wheel.
3. You will see Page 1 displayed on the screen (shown on the left).
4. Press [ENTER] to edit the Pitch Bend settings.
5. Use the [VALUE] dial to select the MIDI Channel for the Pitch Bend
wheel.
6. Press [ENTER] to accept the change.
PRESS ENTER TO EDIT
To Next Page
Loading...
