What to do if no sound comes from Akai Party Box 810 after inserting USB/SD Card?
If your Akai Portable Speakers don't produce sound after inserting a USB/SD card: * Ensure the file format is MP3. * Make sure the USB/SD card is correctly plugged in.
General| Bluetooth | Yes |
|---|---|
| Bluetooth version | 5.0 |
| Compatible memory cards | MicroSD (TransFlash) |
| Connectivity technology | Wired & Wireless |
| 6.35 mm (1⁄4-inch) input | 1 |
| Battery voltage | 7 V |
| AC input voltage | 100 - 240 V |
| Battery capacity | 5 Ah |
| Power source type | AC, Battery |
| AC input frequency | 50 - 60 Hz |
| Battery life (max) | 2.5 h |
| Battery recharge time | 6 h |
| Impedance | 3 Ω |
| Sensitivity | 68 dB |
| Frequency range | 60 - 16000 Hz |
| RMS rated power | 50 W |
| Speaker type | 2-way |
| Speaker placement | Floor |
| Built-in amplifier | - |
| Audio formats supported | MP3, WAV, WMA |
| Control type | Buttons |
| Display type | LED |
| Product color | Black |
| Housing material | Plastic |
| Cables included | AC |
| Quantity per pack | 1 pc(s) |
Weight and Dimensions| Depth | 269 mm |
|---|---|
| Width | 290 mm |
| Height | 626 mm |
| Weight | 6830 g |
| Package depth | 307 mm |
| Package width | 333 mm |
| Package height | 671 mm |
| Package weight | 8070 g |
Long press the main ON/OFF power switch (01) to turn the power on.
Connect the power cord to recharge the battery. LED indicator shows charging status.
Switch the system to standby mode using the power button (01) on the remote control.
Change input modes like Bluetooth, USB/SD, or AUX-IN using the MODE button.
Control playback volume using the knob (09) or remote buttons (05) and (11).
Select one of 5 preset audio equalizations using the EQ button (10).
Adjust treble and bass levels using the MENU button (07) and volume knob (09).
Turn the (09) knob to adjust the main volume.
Adjust microphone echo using the MENU button (07) and volume knob (09).
Adjust microphone sound level using the MENU button (07) and volume knob (09).
Adjust guitar sound level using the MENU button (07) and volume knob (09).
Select different lighting effects by pressing the LED button (05).
Switch voice announcements ON/OFF using the MODE button (02) or remote button (04).
Connect two compatible speakers wirelessly for stereo sound output.
Insert USB memory or Micro SD card for playback. Supports MP3 format.
Connect external devices with audio output via a 3.5mm jack.
Tune in to FM radio stations, with auto-search and station saving capabilities.
Instructions for safely removing and replacing the appliance's battery.
Guidelines for environmentally responsible disposal of the product.
To Next Page
