!
CAUTION
● Do not put the appliance near a heat source.
● Do not expose the appliance to direct sunlight.
i
This appliance is equipped with rubber feet to prevent it from
moving. The feet are made from non-migrating material specially
formulated to avoid leaving any marks or stains on furniture.
However, certain types of furniture polishes, wood preservatives or
cleaning sprays cause the rubber to soften and leave marks or a
residue on the furniture, and potentially risk the surface to become
damaged. To prevent damage to wooden surfaces, we recommend
that you apply self-adhesive pads to the bottom of the rubber feet
before installation.
Installing the speakers3.1
The cables and terminals are colour-coded:
Red wires connect to red terminals (+). -
Black wires connect to black terminals (-). -
● Place the speakers on a horizontal at
surface. Place the speakers close
enough to the appliance to be able to
connect the wires.
Connection to the appliance
● Lift the latches to open the terminals.
● Connect the wire ends of the speakers to
the appliance matching the (+) and (-)
polarity markings.
● Press the latches to lock the wire ends.
To Next Page
Loading...
