EasyManua.ls Logo

Akai QXA6630

Akai QXA6630
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
QXA6630
General functions5.2
To switch on the appliance, slide the switch (16) to the ON position.
To switch off the appliance, slide the switch (16) to the OFF position.
To select the source mode (CD, AUX IN, AM, FM), slide the FUNCTION
switch (1) to the desired position.
To adjust the volume level, turn the VOLUME dial (6) until the desired
level is set.
To connect an external audio device, insert the cable plug in the AUX IN
jack (5).
To connect a headphone, insert the cable plug in the headphone jack (7).
Radio functions5.3
To select the radio band, slide the FUNCTION switch (1) to the AM or FM
position.
To select a frequency or radio station, turn the TUNING dial (11) until the
desired frequency is set.
i
To improve the reception of the FM frequency, extend the aerial
antenna. To improve the reception of the AM frequency, turn the
appliance.
CD functions5.4
To select the CD function, slide the FUNCTION switch (1) to the CD position.
To insert a CD:
Press the OPEN button (15) to open the CD compartment (14). -
Insert the CD with the label upwards. -
Close the CD compartment (14). -
The display shows the total number of tracks on the CD.
To start playback, press the PLAY/PAUSE button (10) once.
During playback, the following functions are available:
To select a track, press the PREV button (4) or the NEXT button (2) until
the desired track is set.
To search for a specic point on the disc, hold the PREV button (4) or the
NEXT button (2) until the point is reached and release the button.

Related product manuals