Start up or shut
down the machine
Cyclic switching of L/R, headset,
Bluetooth and USB audio input
Remark: The above functions may differ from different models, and are for reference only.
Remote Control
Start up or shut
down the machine
Replay of single track and all tracks
Cyclic switchingof L/R, headset, optical
fiber, Bluetooth, USB audio input
Cyclic switching of 4 different sound
filed modes
Remark: The above functions may differ from different models, and are for reference only.
AUX IN
A 3.5 audio connecting cable is needed (included in the list of accessories)
1. Connect one end of the 3.5 audio connecting cable to the audio output interfaceand the other
end to the AUX input interface of the machine.
2. Press the Standby key on the machine or the Standby key on the remote control to start the
machine. After the machine is started, the white indicator will keep on or show .
3. If the white indicator is not in on status or does not show , press Sound Source
Switching key repeatedly or the L/R key on the remote control to switch to AUX mode, then
the white indicator will keep on or show .
4. Make sure that the audio setting of the sound source is in “Connecting to Sound Equipment”
5. Play your sound source equipment with the machine.
USB
A USB flash disk is needed (excluded in the list of accessories)
1. Insert the USB flash disk in the USB interface.
2. Press the Standby key on the machine or the Standby key on the remote control to start the
machine. After the machine is started, the white indicator will keep on or show .
3. Press Sound Source Switching key repeatedly or the USB key on the remote control to switch
to USB mode, then the purple indicator will keep on or show .
4. Ensure that your USB flash disk is stored withMP3 audio.
5. If your USB flash disk is stored with MP3 audio, you can play it with the machine.
6. USB devices must be operated with the remote control. : pause/ play; :
To Next Page
Loading...
Need help?
General
