Akai VS-G205

32
Specifications
ae) | VHS standard (PAL, MESE-
CAM)
Rotary, slant azimuth two-head
helical scan system
Video recording system ....
Rotary heads ..............0006 2 video heads
RF. input 2.20.0... eee eeeees System B, G (PAL, SECAM)
VHF ch 2-4,5-12
UHF ch 21 - 69
Cable ch S1’ - S3’, S1 - S41
RF, Output ..........cceseeeeeeees System G type modulation
UHF ch 30 - 39 adjustable
(preset ch 36)
Recording (line input) ........ PAL, SECAM (MESECAM Tape)
Playback (line output) ....... PAL, SECAM (MESECAM Tape)
Video
Line input level ............. 0.5 - 2.0 Vp-p/75 ohms, unbal-
anced
Line output level ........... 1.0 Vp-p/75 ohms, unbalanced
S/N ratio ...........cccce eee More than 45 dB
Horizontal resolution ..... More than 250 lines
Audio
Line input level ............. -6dBm/50 K ohms, unbalanced
Line output level ........... -6dBm/1 K ohms, unbalanced
S/N ratio ..... eee eee es More than 40 dB
Frequency response ...... 70-10,000 Hz
Recording/playback time .. 240 min. with E-240 cassette
Tape Speed ...........:ceeeeeeee 23.39 mm/sec
Quick finder .............:.. Approx. 7 times normal speed
FF, REW time .......eeeeeeeees Approx. 2 min. with E-180 cas-
sette
. Timer
Programme .........:ccsseee 4 programme / 1 year and OTR
Clock reference ............ Quartz crystal
Display .......ccccsssseseeenees FL (Tape counter, Timer etc.)
Power requirements ......... 220-230 V AC, 50 Hz
Power consumption .......... 18W
Operating temperature ...... 5°C - 40°C
Dimensions ..............ce000 425(W) x 90(H) x 276(D) mm
Weight ..........cccsesseeeeeeeenes 4.0 kg
Standard accessories
AG power Cable ......... ccc eeseceeeessseneceeeseeneereneeeeessesseneness 1
Antenna Cable 0.0... eee ccrsecneesceece rece seeeeseeenenaneeeanees 1
Remote Control unit ...........cccecssccseneeesenssneuseeoneneseseesees 1
Batteries for remote Control ...............::eeeeeeeeseeeeeveeneeeeee 2
® For improvement purposes, specifications and design are
subject to change without notice.
Maintenance
When a dirty tape is used, dirt will accumulate on the video
heads. This will cause disturbances on the TV screen which
cannot be eliminated with the VCR's tracking control or the
TV's fine tuning control. if this should occur, the heads as well
as other internal parts must be cleaned. VCR cleaning must be
done by a qualified service shop or an authorized AKAI service
centre. This VCR is a finely precisioned instrument, and con-
tains no customer serviceable parts, so never open the VCR
yourself. Take it to a qualified service shop or to an authorized
AKAI service centre to be cleaned.