9 10
Note: If you have downloaded “Akaso Smart” to link your cameras, please remove
cameras linked to Akaso Smart account and download “Smart Life” to link your
cameras again. (More details, please refer to the procedure “SET-UP”.)
1. Use Amazon Echo To Control
a. Configure the Amazon Echo device
(If you have already configured Amazon Echo, you can skip this step. The following
instructions are based on the iOS client.)
① Make sure your Amazon Echo device is powered on and connected to a Wi-Fi
network.
② Open the Alexa app on your phone. After successful login, tap on the menu in the
upper left corner of the Home page, select "Settings" and tap "Set Up A New
Device" to set up the Amazon Echo.
③ Choose your Amazon Echo device type and language for connecting. Press and
hold the small dot on the device until the light turns yellow. Then tap "Continue"
to connect to the hotspot.
④ After connecting to the Amazon Echo hotspot, return to the page. At this point,
the connection is successful. Tap "Continue" to proceed to the next step. Choose
a Wi-Fi network to connect to. Amazon Echo
will take a few minutes to try to connect to
the network.
b. Key step - link Skill
① Tap on "Skills" in the Alexa app menu.
USE THIRD PARTY DEVICES TO CONTROL
⑥ Click camera icon to preview camera live video.
IPC
Direction
Screenshot
Alarm
Speak
Playback
HD
2020-02-07 13:51:48
Record
Signal: 91%
⑤ Wait for the connection for about 30s, the device will be added successfully.
Name your camera and click the room where it is, click “Done”.
To Next Page
Loading...
Need help?
General
