6. Slow Motion
1080P120/1080P60/720P120/720P60 (Default setting: 1080P60)
This option allows you to set the resolution at which the camera records
slow-motion videos. The video footage will appear to be in slow motion when
played back.
Note: This option is available in Slow Motion Video mode only. It will be disabled
when Image Stabilization is turned on.
7. Fast Motion
2X/4X/6X/10X/10X /15X (Default setting: 2X)
This option allows you to set the rate by which the video is sped up.
Note: Thisoption is available in Fast Motion Video mode only.
8. Audio Record
Off/On (Default setting: On)
When Audio Record is disabled, the camera will record video without audio. You
canchoose to turn it on or off.
Note: This option works in Video and Loop Record modes only.
9. Microphone
Built-in/External (Default setting: Built-in)
You have the option to select either a built-in microphone or an external one. To
use an external microphone for better sound quality, please first choose the
"External" option, then plug the compatible microphone (sold separately) into the
camera's USB port.
10. Exposure Value
-2.0/-1.0/0.0/+1.0/+2.0 (Default setting: 0.0)
By default, your camera uses the entire image to determine the appropriate
exposure level. However, Exposure lets you select an area that you want the
camerato prioritize when determining exposure. This setting is particularly useful
in shots where an important region might otherwise be over-or underexposed.
The camera will display changes in the image the instant you change the setting. It
will resume using the entire image to determine the appropriate exposure level if
you switch modes.
01 02 03 04
05 06 07 08 09 10
11
12 13 14 15 16
17 18 19 20 21
22 23 24 25 26
EN
To Next Page
