Photo Settings
To configure the photo settings, first make sure the camera is on the settings
screen, then tap on the photo icon on the left to access the photo settings screen.
1. Photo Resolution
20MP/16MP/14MP/10MP/8MP/5MP/2MP (Default setting: 20MP)
This camera is capable of capturing 20MP photos, with higher resolution offering
greater clarity and detail due to the increased number of pixels. However, higher
resolution photo also results in larger file sizes.
2. Output Format
JPEG/JPEG+DNG (Default setting: JPEG)
Output Format decides the photo’s output formats including JPEG and JPEG+DNG.
DNG stands for Digital Negative, a lossless raw image format that preserves image
data without compression or loss. Choosing DNG results in larger photo file sizes,
but ensures superior image quality and protection against data loss.
11. Wind Noise Reduction
Off/On (Default setting: Off)
This option can reduce noises generated during video recording, allowing for
enhanced audio quality. You can choose to turn it on or off.
Note: This option works in Video and Loop Record modes only.
12. Auto Low Light
Off/On (Default setting: Off)
This option automatically adapts camera settings based on lighting conditions to
deliver optimal performance in low-light situations. It eliminates the need for
manual adjustments, even when transitioning between bright and dark
environments.
Note: This option works in Video and Slow Motion Video modes only.
13. Meter
Center/Average/Spot (Default setting: Average)
This option allows you to set the metering mode for different scenes. You can
choose a desired meter mode according to the scene.
01 02 03 04
05 06 07 08 09 10 11
12 13 14 15 16
17 18 19 20 21
22 23 24 25 26
EN
To Next Page
