Please make sure the battery is full of power when use it for the first time.
Charge the battery: connect the camera to a computer or USB power supply. When it’s charging, the light remains
ON. When fully charged, the light will turn OFF.
Power ON/ Power OFF
To power ON, Press the Power/Mode Button; To power OFF, press and hold the Power/Mode Button.
Overview of Basic Functions
There are 6 modes: Video, Photo, Burst Photo, Time Lapse, Playback, Settings. To adjust camera specifics for video,
photo, exposure, language and more, go to Settings to set it up.
Video Mode
Video Mode is the default mode after the camera power on.
Make sure the Video icon shows on the screen before recording. If not, press the Power/Mode
Button repeatedly until it appears.
Press the Shutter/Select Button, the camera will start to record video. Meanwhile, the status light will flash and one
beep will be emitted by the camera.
Press the Shutter/Select Button to end video recording.
Loop recording: In VideoSetting, turn on the loop recording. The return to Video Mode, press the OK Button to
record, the video will automatically be saved as a file (depends on the chosen video resolution, usually about 2/3/5
mins). The recording time on IPS screen starts at zero. When the memory is full, the first video would be covered,
and so on.
When recording starts, you can not switch modes. To switch mode, please stop recording first.
When the battery runs out, the camera will stop working. But the video will be saved automatically.
Photo Mode
Press Power/Mode Button repeatedly to switch to Photo Mode.
Shooting photo: in Photo Mode, press Shutter/Select Button to shoot photos; The camera will emit a camera shutter
sound if it has been turned on in Settings.
Burst Photo Mode
Press Power/Mode Button repeatedly to switch to PhotoSetting;
Press Shutter/Select Button and choose Burst Photo;
In Burst Photo Mode, it takes 1s to take 3 photos. The camera will emit a camera shutter sound if it has been turned
on in CameraSetting.
Time Lapse Photo Mode
Press Power/Mode Button repeatedly to switch to PhotoSetting; Press Shutter/Select Button and choose Time Lapse
Photo;
In Time Lapse Photo Mode, your AKASO Action Camera captures a series of photos at 3s/5s/ 10s/30s/1m intervals.
Time-Lapse Video Mode
Press Power/Mode Button repeatedly to switch to VideoSetting; Press Shutter/Select Button and choose Time Lapse
Video; In Time Lapse Video Mode, your AKASO Action Camera records video at 1s/3s/5s/10s/30s/1m intervals.
video playback Mode
To review videos on the camera, press the Power/Mode Button repeatedly to switch to video playback Mode.
Press Up or Down Button to cycle through the overview of videos.
Press Shutter/Select Button to playback the desired one.
To delete videos, press the Shutter/Select Button for 5s. The menu for deleting will show up.
Then Press the Shutter/Select Button to delete the videos you want.
To Next Page
Loading...
