- 10 -
Additional Options for Connecting to your SP+ Units Web UI
Option #1. If using DHCP check your network router's DHCP assignments list.
How do I find the DHCP list on my router? (the following may be different depending on your router
type)
Click the Status tab after logging into your router, then the Local Network sub-tab. Click the DHCP
Client Table button under the DHCP Server section. This should bring up a list of clients that are
currently connected to your network. You should see your SP+ unit in this list.
After identifying the IP address assigned, open your browser and type in the IP address.
To Next Page
Loading...
