Do you have a question about the AKG C 3000 and is the answer not in the manual?
Type | Condenser |
---|---|
Polar Pattern | Cardioid |
Impedance | 200 Ohms |
Recommended Load Impedance | 1000 Ohms |
Connector | XLR |
Equivalent Noise Level | 18 dB-A |
Signal to Noise | 76 dB |
Preattenuation Pad | -10dB |
Frequency Response | 20Hz - 20kHz |
Sensitivity | 25 mV/Pa |
Max SPL | 140 dB SPL |
Supply Voltage | 48 V |
Important safety warning regarding connection and grounding of the equipment.
Welcome message and instructions to read the manual before operating the equipment.
Details the included components: C 3000 microphone, shock mount, and carrying case.
Information on how to find and purchase additional accessories for the microphone.
Highlights the microphone's design, components, and professional standards.
Explains the preattenuation pad and bass cut filter selectors on the microphone.
Critical warning about using only approved phantom power sources and balanced cables.
Instructions for cleaning the microphone body using a soft, moistened cloth.