Need help?Do you have a question about the AKO AKO-D140 Series and is the answer not in the manual?
Covers defrost initiation, types, termination, and master-slave synchronization.
Details the pump down function for refrigerant management.
Instructions to enter the programming menu and change the set point.
Guide to changing various operating parameters.
Comprehensive reference for all controller parameters by function.
General| Output | Relay |
|---|---|
| Accuracy | ±1°C |
| Control Method | On/Off |
| Sensor Type | NTC |
| Mounting | Panel type |
| Input Type | NTC |
| Control Output | Relay |
| Display | LED |
| Supply Voltage | 230V AC ±10% 50/60Hz |
| Power Supply | 230V AC ±10% 50/60Hz |
To Next Page
