Akuvox R20A Quick Guide

1
1
Wall-mounng Accessories :
Camera
Card Reader
Microphone
Infrared Sensor
Infrared LED
Speaker
Wiring cover
Before using the device, check the device model and ensure that the shipped box includes the
following items:
Photosensitive Sensor
Call Button&Status LED
R20A
R20A
Wall-mounng Installaon
6
M2.5x6 crosshead screw
1
Rope
1
2
Sealing pressing plate
Diode
1
2
Wall-mounting bracket
M4x30 crosshead screw
4
Wall-mounting screw
2
M3x6 hex socket screw
4
1
4
Allen wrench
Plastic wall anchor
ST4x20 crosshead screw
1
Rubber plug (small)
1
Rubber plug (medium)
1
Rubber plug (large)

Akuvox R20A Specifications

General

Audio	Built-in Microphone and Speaker
Installation	Wall-mounted
Ingress Protection	IP65
Card Reader	13.56MHz, Mifare
RS485	Yes
Camera	2MP
Network	10/100Mbps Ethernet
Protocols	SIP
Power	PoE or 12V DC
PoE	IEEE 802.3af
Relays	1
Input	2