Need help?Do you have a question about the Akuvox R20 Series and is the answer not in the manual?
General| Installation | Wall-mounted |
|---|---|
| Camera | 2MP |
| Audio | Built-in microphone and speaker |
| Ethernet | 10/100Mbps |
| Power Supply | PoE or 12V DC |
| Protocols | SIP |
Covers configuring network settings, including DHCP and static IP addresses for the R20 series.
Details how to configure SIP accounts and SIP server settings for the R20 series door phone.
Explains various call-related configurations, such as no-answer calls, push button actions, and call timing.
Explains how the R20 series obtains network settings automatically via DHCP.
Describes how to manually configure static IP address, subnet mask, gateway, and DNS servers.
Details the fields for configuring the SIP account, including display label, register name, username, and password.
Explains how to enter the SIP server's IP address or URL and port number.
Defines actions to be performed when the push button is pressed, like receiving messages or snapshots.
Configuration for sending email notifications, including sender/receiver details and SMTP server settings.
Settings for configuring FTP notifications, including server details and credentials.
Step-by-step guide to obtain new card information and add it to the system for access.
Manages existing card information, allowing administrators to modify permissions or clear the list.
Explains the three relay terminals (NO, NC, COM) and their functions for switching.
Allows firmware upgrades, factory resets, and device reboots.
Enables modification of the web interface administrator and user passwords.
To Next Page
