R20 series supports RTSP stream, go to Intercom->RTSP, to
enable or disable RTSP server. The URL for RTSP stream is:
rtsp://IP_address/live/ch00_0
R20 series supports ONVIF protocol, which means R20
series’s camera can be searched by other devices, like NVR,
which supports ONVIF protocol as well. Go to Intercom->Onvif,
to configure Onvif Mode and its username/password.
Switching Onvif Mode to undiscoverable means that User
must program Onvif’s URL manually.
The Onvif’s URL is:
http://IP_address:8090/onvif/device_service
To Next Page
Loading...
