Need help?Do you have a question about the Akuvox R26C and is the answer not in the manual?
General| Audio | Built-in Microphone and Speaker |
|---|---|
| Ethernet | 10/100 Mbps |
| Operating System | Linux |
| RS485 | Yes |
| Relays | 2 |
| Operating Temperature | -10°C to 50°C |
| Installation | Wall-mounted |
| Weight | 1.2 kg |
| Resolution | 1024 x 600 |
| Camera | 2MP |
| Connectivity | Ethernet |
| Power Supply | PoE (802.3af) |
| Processor | Quad-core |
| Storage | 8GB |
| Card Reader | MicroSD |
| Operating Humidity | 10 ~ 90% (non-condensing) |
| Protocols | SIP |
Akuvox R26X is a SIP-compliant handfree video outdoor phone for remote unlock control and monitor.
Key features include vandal resistant body, wide-angle camera, POE, and two-way audio communication.
Details on body material, camera specs, button, sensors, card reader, relays, power, and dimensions.
Specifies SIP versions and supported audio/video codecs for the device.
Details on video resolution, frame rate, LED lighting, and compatibility with NVRs.
Features like DTMF tone control, camera operation, white balance, and auto-night mode.
Information on Ethernet port and supported network protocols like IPv4, HTTP, TCP/IP.
Diagram and labels for the R26C model's front panel components.
Diagram and labels for the R26P model's front panel components.
Step-by-step guide for installing the device with an 86 embedded box.
Instructions for installing the device without an 86 embedded box.
Steps for installing the back cover and securely mounting the device.
Instructions for obtaining the IP address and logging into the device's web interface.
Displays device information like Model, MAC address, Firmware, and Hardware version.
Shows network status including LAN port, IP, Subnet Mask, Gateway, and DNS servers.
Details of account settings and registration status, including username and server address.
Basic intercom settings: Account selection, No Answer Call configuration, and Push Button setup.
Configuration for dialing out or answering calls from the website.
Setting the maximum duration for calls and dialing.
Option to enable or disable the Push to Hang up function.
Setup for LED lighting modes, including states, colors, and blink frequencies.
Configures unlock settings: relay types, delay, DTMF codes for remote unlock.
Supports extra web relay for enhanced safety and configuration options.
Details anti-vandal sensor, alarm setup, call number, display name, call timer, and light status.
To Next Page
