Need help?Do you have a question about the Akuvox R29 Series and is the answer not in the manual?
General| Power | PoE or 12V DC |
|---|---|
| Operating System | Android |
| RS485 | Yes |
| Wiegand | Yes |
| Installation | Wall-mounted |
| Tamper-proof | Yes |
| Processor | Quad-Core |
| RAM | 2GB |
| Display | 7-Inch LCD |
| Camera | 2MP |
| Network | Ethernet |
| Integration | SIP, ONVIF |
| Light compensation | Yes |
| Ethernet | 10/100M |
| PoE | 802.3af |
| Operating Humidity | 10% to 90% (non-condensing) |
| Storage | 8GB |
| Protocols | SIP, ONVIF, RTSP |
Details the features and capabilities of the Akuvox R29F/R29S Android-based IP video door phone.
Explains how to connect the power adapter to the door phone's wiring interface.
Describes two methods for initiating calls from the door phone to other units.
Details various methods available for unlocking doors using the device.
Steps to navigate to and enter the device's system settings menu.
Configuring network parameters like IP address, subnet mask, gateway, and DNS.
To Next Page
