Do you have a question about the Akuvox R27A and is the answer not in the manual?
Color | Yes |
---|---|
Video codecs | H.264, H.265 |
Number of buttons | 15 buttons |
Connectivity technology | Wired |
Number of displays supported | - |
Maximum number of cameras supported | 1 |
Megapixel | 2 MP |
Sensor type | CMOS |
Maximum frame rate | 30 fps |
Optical sensor size | 1/2.7 \ |
Minimum illumination | 0.1 lx |
Supported video modes | 1080p |
Viewing angle, vertical | 60 ° |
Maximum video resolution | 1920 x 1080 pixels |
Viewing angle, horizontal | 116 ° |
Speaker power | 2 W |
Display diagonal | - \ |
Control type | Buttons |
Product color | Black, Silver |
International Protection (IP) code | IP65 |
Networking standards | IEEE 802.3af |
Ethernet LAN data rates | 10, 100 Mbit/s |
Supported network protocols | IPv4, HTTP, HTTPS, FTP, SNMP, DNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP, ARP |
LED type | IR |
Power consumption | 400 mA |
Indoor unit power type | DC |
Storage temperature (T-T) | -40 - 70 °C |
Operating temperature (T-T) | -20 - 55 °C |
Operating relative humidity (H-H) | 10 - 90 % |
Outdoor unit included | No |
Depth | 38 mm |
---|---|
Width | 130 mm |
Height | 280 mm |
Important compliance and caution information regarding FCC rules and potential interference.
Detailed description of the Akuvox R27A door phone and its main functionalities.
Highlights the key features and technical specifications of the R27A door phone.
Explains the function of each physical key on the R27A door phone keypad.
Accessing advanced settings via administrator interface for system and admin configurations.
Managing user access through public/private PINs and user cards.
How to initiate a call from the Akuvox R27A door phone using account or IP address.
How to answer incoming calls on the Akuvox R27A door phone, including auto-answer.
Methods for unlocking the door using PIN code, RF card, or DTMF code.
Steps to find the IP address of the Akuvox R27A for web interface access.
Instructions for logging into the web interface using default username and password.
Viewing product, network, and account information from the status menu.
Configuration and usage of intercom features for communication and door control.
Configuring SIP account settings, servers, and proxy options for network communication.
Basic and advanced network configuration for LAN port settings and connectivity.
Settings related to time, language, call features, and voice configurations.
Procedures for upgrading firmware and managing system settings like factory reset.
Modifying web interface passwords for enhanced user and system security.