Akuvox R20 Series User Manual

21
3.6. Motion
R20 series supports motion detection, go to Intercom->Motion
to configure detection parameter.
Motion Detection: To enable or disable Motion Detection
Motion Delay: To configure minium time gap between two
snapshot.
Action to execute: To choose which action to execute after
triggering.
Http URL: To configure URL, If HTTP action is chosen.
Motion Detect Time Setting: To make Motion Detect Time for
a whole week.

Akuvox R20 Series Specifications

General

Installation	Wall-mounted
Camera	2MP
Audio	Built-in microphone and speaker
Ethernet	10/100Mbps
Power Supply	PoE or 12V DC
Protocols	SIP