Akuvox R20 Series User Manual

6
2. Basic Setting
2.1. Getting Started
2.1.1. IP Announcement
While R20 series starts up normally, hold the call button for several seconds after the Status LED turns blue, voice system will enter
IP announcement mode. In announcement mode, the IP address will be announced periodically and “IP 0.0.0.0” would be
announced if no IP address is gained. Press Call Button again to quilt the announcement mode.
2.1.2. Access the device website
Open a Web Browser, access the corresponding IP address. Then, enter the default user name and password to login. The default
administrator User Name and Password are shown below:
User Name: admin
Password: admin

Akuvox R20 Series Specifications

General

Brand	Akuvox
Model	R20 Series
Category	Intercom System
Language	English