Need help?Do you have a question about the Akuvox X915S and is the answer not in the manual?
General| Color | Yes |
|---|---|
| Video codecs | H.264 |
| White balance | Auto |
| Connectivity technology | Wired |
| Number of displays supported | - |
| Voice codecs | G.711a, G.722, G.729 |
| Speaker power | 2 W |
| Number of speakers | 1 |
| Display diagonal | 8 \ |
| Display technology | IPS |
| IK code | IK10 |
| Product color | Black |
| Housing material | Stainless steel |
| International Protection (IP) code | IP65 |
| Networking standards | IEEE 802.3at |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Supported network protocols | IPv4, HTTP, HTTPS, FTP, SNMP, DNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP, ARP |
| Megapixel | 2 MP |
| Sensor type | CMOS |
| Maximum frame rate | 30 fps |
| Optical sensor size | 1/2.8 \ |
| Minimum illumination | 0.1 lx |
| Supported video modes | 1080p |
| Viewing angle, vertical | 63 ° |
| Viewing angle, horizontal | 115 ° |
| LED type | IR |
| Indoor unit power type | DC |
| Storage temperature (T-T) | 30 - 70 °C |
| Operating temperature (T-T) | 30 - 60 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Operating system version | Android 9 |
| Operating system installed | Android |
Weight and Dimensions| Depth | 41.6 mm |
|---|---|
| Width | 130 mm |
| Height | 350 mm |
Diagram illustrating the network setup for Akuvox and LifeSmart devices.
Overview of the IP-based audio and video intercom functionality.
Steps to find the IP address for Akuvox X915S via its interface.
Procedure to retrieve IP addresses for Akuvox R29Z and R29C devices.
Method to discover the IP address of the Akuvox E12 door phone.
Instructions for updating the Akuvox X915S to the latest firmware version.
Steps to disable the SIP hacking protection function on the X915S.
Configuring a static IP address for the Akuvox X915S device.
Activating the Open Relay function for remote HTTP control on X915S.
Configuring speed dial numbers for quick dialing on X915S.
Adjusting settings for facial recognition features on the X915S.
Configuring relay input for the exit button function on X915S.
Process for adding users to the X915S via the web interface.
Integrating LifeSmart Nature with the X915S tenant list.
Setting up speed dial for calls on the X915S call screen.
Instructions for updating the Akuvox R29 to the latest firmware version.
Steps to disable the SIP hacking protection function on the R29.
Configuring a static IP address for the Akuvox R29 device.
Activating the Open Relay function for remote HTTP control on R29.
Configuring speed dial numbers for quick dialing on R29.
Adjusting settings for facial recognition features on the R29.
Configuring relay input for the exit button function on R29.
Process for adding users to the R29 via the web interface.
Integrating LifeSmart Nature with the R29 tenant list.
Setting up speed dial for calls on the R29 call screen.
Instructions for updating the Akuvox E12 to the latest firmware version.
Steps to disable the SIP hacking protection function on the E12.
Configuring a static IP address for the Akuvox E12 device.
Activating the Open Relay function for remote HTTP control on E12.
Configuring speed dial numbers for quick dialing on E12.
Configuring relay input for the exit button function on E12.
Process for adding users to the E12 via the web interface.
Configuring the Wi-Fi connection for the Akuvox E12.
First method for wiring the door phone to an electromagnetic lock.
Second method for wiring the door phone to an electromagnetic lock.
Actions performed by individual users for remote control.
Actions performed by distributors for remote control management.
To Next Page
