Akuvox C313W User Manual (English)

To Next Page

Power-on and Network Conﬁguraon

Video Intercom Kit

Quick Guide

C313W

E12W

1.Power on C313W by POE or power supplier(12V/1A DC), ensure internet connectivity and under same LAN with

E12W. C313W is on DHCP mode by default, if you want static IP or Wi-Fi connection, please refer to C313

Administrator Guide.

2.Power on the device with 12V/1A power supply by POE or power supplier(12V/1A DC), ensure internet

connectivity and under same LAN with C313W. E12W is on DHCP mode by default, if you want static IP or Wi-Fi

connection, please refer to C313 Administrator Guide or E12 Wi-Fi Conﬁguration Quick Guide.

Get SmartPlus Service

1.Then after C313W boots up, tap “More -> Settings -> Advanced Settings -> SmartPlus Account” C313W will

scan and list out all units which under the same LAN. (The default password to access Advanced Settings is

123456)

2.Tap the unit which is listed out to get into setup interface.

Other manuals for Akuvox C313W

Need help?

Do you have a question about the Akuvox C313W and is the answer not in the manual?

General

Display	7-inch capacitive touch screen
Resolution	1024 x 600
Camera	2MP
Audio	Built-in Microphone and Speaker
Operating System	Linux
Processor	Quad-core
RAM	1 GB
Storage	8 GB
Operating Temperature	-10°C to 50°C
RS485	Yes
Relay Output	1
Alarm Input	1
Microphone	Yes
Speaker	Yes
Wi-Fi	802.11b/g/n
Ethernet	10/100Mbps
PoE	Yes (802.3af)
Power Supply	12V DC, PoE