Need help?Do you have a question about the Akuvox C315 and is the answer not in the manual?
General| Brand | Akuvox |
|---|---|
| Model | C315 |
| Category | Intercom System |
| Language | English |
Explains critical safety information to prevent injury.
Highlights information to prevent damage to the device.
Provides informative advice for efficient device use.
Offers useful information for quick and efficient device operation.
Provides basic product, network, and account information.
Covers SIP account, server, codec, and session timer settings.
Details DHCP/Static IP settings, RTP ports, and deployment.
Includes time, language, call features, and data import.
Allows configuration of the local contact list.
Covers firmware upgrade, reset, and auto-provisioning.
Settings for password modification and session timeouts.
Configuration for RTSP and voice assistance setup.
Covers arming zone, mode, disarm code, and alarm actions.
Guides on selecting network connection during initial device boot-up.
How to access and view basic system information on the device.
How to set the display language on the device or web interface.
Step-by-step guide to set the language via the device interface.
Details on setting date, time, time zone, and format on the device.
Configuring screen features like brightness and screen saver on the device.
Instructions to upload screen saver pictures or videos.
Details on adjusting different volume levels on the device.
Managing contacts, groups, and block lists on the device.
Steps to add new contacts to the device's local phone book.
Steps for configuring contact details via the web interface.
Configuring network connection modes like DHCP and static IP.
Steps to configure network settings directly on the device.
Instructions for pairing the device with other Bluetooth devices.
Setting up direct IP calls and configuring IP call features.
Steps to make direct IP calls from the device.
Setting up automatic answering for incoming calls.
Configuring call forwarding modes directly on the device.
Reading, creating, and deleting text messages on the device.
Selecting and configuring audio codecs for encoding/decoding.
Configuring monitor settings and video image capturing.
Setting up remote monitoring of door phones and display options.
Setting arming/disarm codes and checking zone status on the device.
Choosing alarm action types like HTTP command or SIP message.
Configuring relay switch settings for door access and chime bells.
Setting up local relay actions for door access and chime bells.
Unlocking doors using DTMF codes during calls.
Setting up lift control icons and their status.
Explains the principles and protocols used in auto-provisioning.
Capturing and exporting system logs for debugging purposes.
Steps to access the APK interface through hidden operations.
Configuring and managing PBX features directly on the device.
Steps to enable the PBX service on the device.
Changing the password for basic device settings.
Instructions for restarting the device system.
How to reboot the device directly from its interface.
Resetting the device to factory default settings via the device interface.
To Next Page
