X933/C319 Series Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
not intend to answer. In the meantime, you can also define the code to be
sent to the SIP server when you want to reject the call.
Parameter Set-up:
DND: check Whole Day or Schedule to enable the DND function. DND
function is disabled by default.
Return Code When DND: select what code should be sent to the calling
device via SIP server. 404 for “Not found”; 480 for “ Temporary
unavailable”; 486 for “busy here”.
Return Code When Refuse: select code to be sent to the caller side via
SIP server when you rejected the incoming call.
11.7.Device Local RTP configuration
For the device network data transmission purpose, device needs to be set up
with a range of RTP port (Real-time Transport Protocol) for establishing an
exclusive range of data transmission in the network. To set up device local
RTP on web Network > Advanced > Local RTP interface.
To Next Page
Loading...
Need help?
General
