X933/C319 Series Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
Parameters set up:
Location: To select which location the detection device is in, including
Bedroom, Guest room, Hall, Window, Balcony, Kitchen, Study and
Bathroom.
Zone type: To select which type of detection device is, including Infrared,
Drmagnet, Smoke, Gas, and Urgency.
Defence delay: It means when users change the arming mode from other
modes, there will be 90 seconds delay time to get activated.
Alarm delay: It means when the sensor triggered, there will be 90
seconds delay time to announce the notification.
Status: To enable or disable Arming mode on the corresponding Zone.
14.2.4. Configure Alarm Text
After the alarm sensor is set up, you are allowed to customize your alarm text
shown on the screen when an alarm is triggered on web Arming> Zone
Setting > Zone Setting interface. Enter the alarm text for the alarm at each
location according to your need.
To Next Page
Loading...
Need help?
General
