Akuvox E12 - User Manual

Wall-mounting
bracket x 1
E12 x 1 M3x4 crosshead screw x 4Plastic wall anchor x 4
6-PIN cable x 1ST4x20 crosshead screw x 4
Camera
RF Card Reader（Except E12N）
Call Button
E12
Mic
Wiring cover x 1
7-PIN cable x 1
Before you being using the device, please check the version you obtained and ensure that the following
items are included in the shipped box:
M3x6 Torx head screw x 2
Wall-mounting template x 1
Diode
x 1
Torx wrench x 1
E12
Photosensitive Sensor
Unpacking
Product Overview
Universal Accessories :
White Light LED

Akuvox E12 Specifications

General

Ingress Protection	IP65
Installation	Wall-mounted
Operating System	Linux
RAM	1 GB
Camera	2MP camera
Audio	Built-in microphone and speaker
Connectivity	Wi-Fi, Ethernet
Power Supply	PoE (IEEE 802.3af) or 12V DC
Communication Protocol	SIP
Ethernet	10/100 Mbps
Processor	Quad-core
Storage	8 GB
Supported Protocols	SIP, HTTP, HTTPS, TCP/IP, DNS
Relays	1x dry contact relay output

Summary

Unpacking Guide

Universal Accessories

Lists all items included in the shipped box for the E12 device.

Product Overview

Installation Environment

Installation Procedure

Mounting Bracket Installation

Steps to attach the wall-mounting bracket using template, anchors, and screws.

Device Connection and Mounting

Connect wires, secure wiring cover, hang device, and fasten with Torx screws.

Application Network Topology

Device Wiring Details

Wiring Connections and Warning

Details the device's terminal connections and a crucial warning about surge protection.

Wire Length and AWG Table

Provides guidance on appropriate wire gauge and maximum length for installation.

IP Announcement Mode

Device Operation

Making and Receiving Calls

Instructions for initiating calls and how incoming calls are handled automatically.

Device Configuration

Status Indicators

Notice Information