Need help?Do you have a question about the Akuvox E12W Series and is the answer not in the manual?
General| Audio | Built-in microphone and speaker |
|---|---|
| Wireless | Wi-Fi 802.11 b/g/n |
| Ingress Protection | IP65 |
| Installation | Wall-mounted |
| Camera | 2MP front camera |
| Communication Protocol | SIP |
| Ethernet | 10/100Mbps |
| Power | 12V DC |
| Network | Ethernet |
Finding device IP address using push button or IP scanner.
Accessing the device's web interface for configuration.
Configuring the infrared LED for night vision.
Adjusting audio volumes for microphone, speaker, and alarms.
Configuring IP address, subnet mask, and gateway.
Configuring direct IP calls to other devices.
Configuring Session Initiation Protocol (SIP) calls.
Registering SIP accounts for calls.
Configuring primary and backup SIP servers.
Configuring various calling features like DND and call duration.
Selecting audio codecs for call quality.
Configuring video codecs for stream quality.
Detecting unauthorized device removal with tamper alarm.
Configuring motion detection for surveillance.
Setting motion detection parameters like time interval.
Configuring notifications for security events.
Defining actions for security triggers.
Setting up RTSP streaming for real-time monitoring.
Configuring basic RTSP server settings and authorization.
Configuring video and audio codecs for RTSP streams.
Enabling MJPEG capture for real-time monitoring.
Configuring ONVIF for video stream access by third parties.
Guides on changing the web interface password.
To Next Page
