Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
4.Introduction to Configuration Menu
Status: this sections gives you basic information such as product
information, Network Information, and account information etc.
Account: this section concerns SIP account, SIP server, proxy server,
transport protocol type, audio&video codec, DTMF, session timer, etc.
Network: this section mainly deals with DHCP&Static IP setting, RTP port
setting, and device deployment etc.
Intercom: this section covers Intercom settings, Call Log etc.
Surveillance: this section covers Motion Detection, RTSP, MJPEG, ONVIF,
Live stream.
Access Control: this section covers Input control, Relay, Card settings,
Face Recognition setting, Private PIN Code, Wiegand connection etc.
Tenants: this section involves Tenants management and Dial Plan.
Device: this section includes Light settings, tab&button display, LCD
settings and Voice settings.
Settings: this section includes Time&language, Action settings, Door
settings, Schedule for access control.
Upgrade:this section covers Firmware upgrade, device reset&reboot,
configuration file auto-provisioning, fault Diagnosis.
Security: this section is for Password modification.
Mode selection :
1. Discovery mode: It is a plug and play configuration mode. Akuvox
devices will configure themselves automatically when users power on
the devices and connect them to network. It is super time-saving mode
To Next Page
Loading...
Need help?
General
