Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
22.4.PNP Configuration
Plug and Play (PNP) is a combination of hardware and software support that
enables a computer system to recognize and adapt to hardware
configuration changes with little or no intervention by a user. To do this
configuration on web Upgrade > Advanced > PNP Option interface.
22.5.Static Provisioning Configuration
You can manually set up a specific server URL for downloading the firmware
or configuration file. If an autop schedule is set up, the door phone will
perform the auto provisioning on a specific timing according to Autop
schedule you set up. In addition,TFTP, FTP, HTTP, and HTTPS are the
protocols that can be used for upgrading the device firmware and
configuration.
Parameter set-up:
URL: set up tftp，http，https，ftp server address for the provisioning
User Name: set up a user name if the server needs an user name to be
accessed to otherwise leave it blank.
Password: set up a password if the server needs a password to be
accessed to otherwise leave it blank.
To Next Page
Loading...
Need help?
General
