EasyManuals Logo

Akuvox E12W Series User Manual

Akuvox E12W Series
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
26
10.3.SIP Account Registration
Akuvox door phones support two SIP accounts that can all be registered
according to your applications. You can for example, switch between them if
any one of the account failed and become invalid. The SIP account can be
configured on the device and on the device interface.To perform the SIP
account setting on the Web Account > Basic > SIP Account Interface.
Parameter Set-up:
Status: check to see if the SIP account is registered or not.
Account Active: click Enable or Disable to activate or deactivate the
registered SIP account.
Display Name: configure the name, for example the device’s name to be
be shown on the device being called to.
User Name: enter the user name obtained from SIP account
administrator.
Account: select the exact account (Account 1&2) to be configured.
Display Label: configure the device label to be shown on the device
screen.
Register Name: enter the SIP account register Name obtained from the
SIP account administrator.
Password: enter the password obtained from the SIP account

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Akuvox E12W Series and is the answer not in the manual?

Akuvox E12W Series Specifications

General IconGeneral
BrandAkuvox
ModelE12W Series
CategoryIntercom System
LanguageEnglish

Related product manuals