Akuvox E12W Series User Manual

Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
49
15.2.Configure Access Card for Door Unlock
You can manage the card number and corresponding parameters on web
Intercom > Card Setting interface.
Parameters Set-up:
 IC/ID Enable: to active the IC or ID card type.
 Card Status: select “Car Issuing” in the field before adding the RFID card
and change the status back to “Normal” after the card is added.
 IC key DoorNum: select the relay switch available for the RIFD card door
access.

Akuvox E12W Series Specifications

General

Brand	Akuvox
Model	E12W Series
Category	Intercom System
Language	English