Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
Parameters Set-up:
Auto/Account1/Account2: To choose a suitable SIP account to make a
web call. If you call out using IP address, Account selection is no need to
chosen.
10.7.5. Auto Answer
You can define how quick the door phone should response in answering the
incoming SIP/IP call automatically by setting up the time related parameters.
In addition, you can also define the mode in which the calls are to be
answered ( video mode or audio mode). To enable this feature on web
Account > Advanced interface, you can set up the related parameters on web
Phone > Call Feature.
Parameters Set-up:
Auto Answer: Turn on the the Auto Answer function by clicking “Enable”.
Auto Answer Delay: Set up the delay time (from 0-5 sec.) before the call
can be answered automatically. For example, if you set the delay time as 1
second, then the call will be answered in 1 second automatically.
Auto Answer Mode: Set up the video or audio mode you preferred for
answering the call automatically.
Note:
For E12W, the operation path is Intercom > Call Feature.
To Next Page
Loading...
Need help?
General
