EasyManuals Logo

Akuvox E12W Series User Manual

Akuvox E12W Series
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
64
RTSP User Name: enter the name used for RTSP authorization.
RTSP User Password: enter the password for RTSP authorization.
RTSP Authentication Type: select RTSP authentication type between
Basic and Digest”. Basic is the default authentication type.
17.1.2. RTSP Stream Setting
You can select the video codec format for the RTSP stream for the
monitoring and configure video resolution and bit-rate etc based on your
actual network environment on the web Intercom > RTSP > RTSP stream
interface.
Parameter Set-up
RTSP Audio Enabled
tick to enable RTSP audio which means , the door
phone can also send audio information to the monitor by RTSP.
RTSP Video Enabled
the door phone can send the video information to
the monitor. After enabling RTSP feature, the video RTSP is enabled by
default and can not be modified.
Note:
For E12W, the operation path is Surveillance > RTSP.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Akuvox E12W Series and is the answer not in the manual?

Akuvox E12W Series Specifications

General IconGeneral
BrandAkuvox
ModelE12W Series
CategoryIntercom System
LanguageEnglish

Related product manuals