Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
Parameter Set-up:
Time Zone: select the specific time zone depending on where the device
is used and then press Confirm tab for the confirmation. The default time
zone is GMT GMT+0.00.
Primary/Secondary Server: the time zone server,normally it will
automatically obtain the time when connecting to the network. The
secondary server will take effect when the primary server is invalid.
Update Interval: to configure interval between two consecutive NTP
requests.
You can also set up time manually, select the Manual checkbox, and input
time data.
To Next Page
Loading...
Need help?
General
