Akuvox X933 Series User Manual

Version: 1.0 | Date: Feb.2021
Version: 2.0 | Date: April.2021

Akuvox X933 Series Specifications

General

Audio	Built-in Microphone and Speaker
Operating System	Android
RAM	2GB
RS485	Yes
Wiegand	Yes
Inputs	2
Display Type	LCD
Touchscreen Type	Capacitive
Processor	Quad-core
Communication Protocol	SIP
Ethernet	10/100Mbps
Wi-Fi	802.11 b/g/n
Power Supply	12V DC
PoE	802.3af
Operating Temperature	+55°C

Summary

Access the Device

Device Start-up Network Selection

Procedure to select Ethernet or wireless network connection after device boots up.

Accessing the Device Setting on the Device

How to access basic and advanced settings directly on the device.

Accessing Device Basic Setting

Steps to access and view basic device information like MAC and firmware.

Accessing Device Advanced Setting

Steps to access advanced settings by entering a system code.

Access the Device Setting on the Web Interface

How to log into the device web interface using IP address and credentials.

Language and Time Setting

Language Setting

How to set the device language on the device or via the web interface.

Time Setting

Configuration of time zone, date, and time format on the device or web interface.

Time Setting on the Device

Detailed steps for setting automatic/manual date, time zone, and date format on the device.

Time Setting on the Device Web Interface

Procedure to set time and date synchronization via NTP server on the web interface.

Screen Display Configuration

Device Screen Display Settings

Web Interface Screen Display Settings

Icon Customization

Sound and Volume Configuration

Volume Configuration

Adjusting various volume levels like ring, talk, mic, tone, and media.

Configure Volume on the Device

Configure Volume on the Web Interface

Phone Book Configuration

Device Phone Book Management

Web Interface Phone Book Management

Network Setting & Other Connection

Device Network Configuration

Configuring DHCP/Static IP and network connection on the device and web interface.

Device Deployment and NAT Settings

Configuring network deployment, location, and NAT settings.

Bluetooth and Wi-Fi Settings

Pairing Bluetooth devices and configuring Wi-Fi connection.

Intercom Call Configuration

IP and SIP Call Setup

Making and configuring IP and SIP calls, including account registration and server settings.

Call Handling and Transmission

Configuring DND, RTP ports, transmission types, auto-answer, and live stream.

Advanced Call Features

Setting up intercom preview, mute, emergency calls, multicast, and call forwarding.

Audio & Video Codec Configuration for SIP Calls

Audio Codec Configuration

Video Codec Configuration

Security

Monitor and Image Settings

Configuring monitor display and capturing video images.

Alarm and Arming Configuration

Setting up alarm sensors, arming modes, and alarm actions on device/web.

Screen Lock and Voice Security

Configuring screen unlock, voice encryption, and remote control.

Door Access Control Configuration

Relay Switch Settings

Configuring local and remote relay settings for door access and DTMF control.

Door Unlock Configuration

Setting up door unlock via DTMF codes and HTTP commands.

Firmware Upgrade

Backup

Auto-provisioning via Configuration File

Provisioning Principle

Introduction to the Configuration Files for Auto-Provisioning

Autop Schedule

DHCP Provisioning Configuration

Static Provisioning Configuration

Device Integration with Third Party

Enter Applications Screen

Install Third-party App

Password Modification

Modify Device Basic Setting Password

Modify Device Advanced Setting Password

Modify Device Web Interface Password

Modify Browser Password

System Reboot & Reset

Device Reboot Procedures

Device Reset Procedures