Akuvox X933 Series User Manual

X933 Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
122
continue to capture data packet even after the data packets reached its
50M maximum in capacity. If you set it as “ Disable” the PCAP will stop
data packet capturing when the data packet captured reaches the
maximum capturing capacity of 1MB.
22.3. User Agent
User agent is used for the identification purpose when you are doing analysis
on the SIP data packet. To do this configuration on web Account > Advanced
interface.

Akuvox X933 Series Specifications

General

Brand	Akuvox
Model	X933 Series
Category	Intercom System
Language	English