Akuvox X933 Series User Manual

X933 Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
96
Parameter Set-up:
 IP address: enter the web relay IP address.
 User Name: enter the User name provided by the web relay manufacturer.
 Password: enter the password provided by the web relay
manufacturer.The passwords is authenticated via HTTP and you can
define the passwords using “http get” in Action.
 Web Relay Action: enter the specific web relay action command provided
by the web manufacturer for different actions by the web relay.
 IP/SIP: Enter the relay extension information, which can be a IP address
or SIP account of an intercom device such as an indoor monitor, so that
the specific action command will be sent when unlock is performed on
the intercom device, while this setting is optional. And please refer to the
example below:
http://admin:admin@192.168.1.2/state.xml?relayState=2.
15.3.Door Unlock Configuration
15.3.1. Door Unlock by DTMF Code

Akuvox X933 Series Specifications

General

Brand	Akuvox
Model	X933 Series
Category	Intercom System
Language	English