X933 Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
Parameter Set-up:
UDP: select “UDP” for unreliable but very efficient transport layer
protocol. UDP is the default transport protocol.
TCP: select “TCP” for Reliable but less-efficient transport layer protocol.
TLS: select “TLS” for Secured and Reliable transport layer protocol.
DNS-SRV: select “DNS-SRV” to obtain DNS record for specifying the
location of services. And SRV not only records the server address but
also the server port. Moreover, SRV can also be used to configure the
priority and the weight of the server address.
11.9.Call Setting
X933 will auto answer all incoming calls if call auto-answer is enabled and
receive live stream if live stream is enabled.
11.9.1. Call Auto-answer Configuration
X933 will auto answer all incoming calls if call auto-answer is enabled and
receive live stream if live stream is enabled. To do the configuration on web
Account > Advanced > Call > Auto Answer and Phone > Call Feature interface.
To Next Page
Loading...
Need help?
General
