Akuvox X933 Series - Configure Alarm and Arming on the Web Interface

X933 Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
82
14.2.2. Configure Alarm and Arming on the Web
Interface
To set up a location-based alarm sensor on the device web Arming> Zone
Setting > Zone Setting interface.
Parameter Set-up:
 Location: set up the location according to where the alarm sensor is
installed. You can select among ten location types: “Bedroom”, “Gate”,
“ Door” “ Guest room” ,“ Hall” ,“Window”, “ Balcony” ,“Kitchen”, “ Study”