X933 Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
15. Door Access Control Configuration
15.1.Relay Switch Setting
15.1.1. Local Relay Setting
Local relays in X933 indoor monitor can be used to trigger relay for the door
access and trigger Chime bell as needed in different scenarios. You can do
this configuration on web Phone - Relay - Relay Setting - Local Relay
interface.
Parameter Set-up:
Relay Delay: Set the relay delay time after the relay is triggered.
Relay Type: Set relay action type. There are two types of relay, chime bell
and open door. Chime Bell, when there is a call, the chime bell will ring.
Open door, when press the unlock icon, the local relay will be opened.
Remote Control: Enable it to trigger local relay by DTMF and vice versa.