Akuvox X933 Series - Security

X933 Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
79
14. Security
14.1.Monitor and Image
14.1.1. Monitor Setting
You can configure the monitor setting on the web Phone - Monitor interface.
Enter IP/SIP number of door phone in Device number and fill in device name.
Then set up the RTSP address. The RTSP format of the Akuvox door phone is
rtsp://deviceIP/live/ch00_0. Enable or disable display in the call. If enabled,
when there is an incoming call from the monitor, the video will be displayed.