X933 Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
24. Password Modification
24.1.Modify Device Basic Setting Password
To do the configuration on device Settings > Advanced Settings > Protected
Code screen to choose System Code to change a new password. The default
password is 123456.
24.2.Modify Device Advanced Setting Password
This password is used to enter the advanced settings of the device, including
password settings, account numbers, SOS numbers, network settings, etc.
To modify the advanced setting password on device Settings > Advanced
Settings > Protect Code > Setting Code screen. The default password is
123456.
To Next Page
Loading...
Need help?
General
