Akuvox X933 Series User Manual

X933 Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
45
Parameter Set-up:
 DHCP: select the DHCP mode by moving the toggle switch to the right.
DHCP mode is the default network connection. If the DHCP mode is
turned on, then the door phone will be assigned by the DHCP server with
IP address, subnet mask, default gateway, and DNS server address
automatically.
 Static IP: select the static IP mode by checking off the DHCP check box.
When static IP mode is selected, then the IP address, subnet mask,
default gateway, and DNS servers address have to be manually
configured according to your actual network environment.
 IP Address: set up the IP Address if the static IP mode is selected.
 Subnet Mask: set up the subnet Mask according to your actual network
environment.
 Default Gateway: set up the correct gateway default gateway according
to the IP address of the default gateway.
 Preferred&Alternate DNS Server: set up preferred or alternate DNS Server
(Domain Name Server) according to your actual network environment.
Preferred DNS server is the primary DNS server address while the
alternate DNS server is the secondary server address and the door phone
will connects to the alternate server when the primary DNS server is
unavailable.

Akuvox X933 Series Specifications

General

Brand	Akuvox
Model	X933 Series
Category	Intercom System
Language	English