Akuvox X933 Series User Manual

X933 Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
108
Note:
 The custom Option type must be a string. The value is the URL of
TFTP server.
Parameter Set-up:
 Custom Option: enter the DHCP code that matched with corresponding
URL so that device will find the configuration file server for the
configuration or upgrading.
 DHCP Option 66: If none of the above is set, the device will automatically
use DHCP Option 66 for getting the upgrade server URL. This is done
within the software and the user does not need to specify this. To make it
work, you need to configure the DHCP server for the option 66 with the
update server URL in it.
 DHCP Option 43: If the device does not get an URL from DHCP Option 66,
it will automatically use DHCP Option 43. This is done within the
software and the user does not need to specify this. To make it work, you
need to configure the DHCP server for the option 43 with the update
server URL in it.

Akuvox X933 Series Specifications

General

Brand	Akuvox
Model	X933 Series
Category	Intercom System
Language	English