Why is the braking action too weak on my AL-KO Lawn Mower?
If the braking action of your AL-KO Lawn Mower is too weak, it could be due to high frictional losses in the transmission system, corrosion at the drawbar, or the drawbar sliding in completely. To resolve this, make the transmission system and brake cable smooth-running and grease them. If the issue is due to impact damage during maneuvering, visit an AL-KO service station.
What to do if my AL-KO 352 VB2 Lawn Mower has unstable road behavior and jerky braking?
If your AL-KO Lawn Mower exhibits unstable road behavior or jerky braking when releasing the throttle, the shock absorber of the IBS might be defective. In this case, have the shock absorber(s) replaced.
Why is reversing stiff or blocked on my AL-KO 352 VB2 Lawn Mower?
If reversing is stiff or blocked on your AL-KO Lawn Mower, it may be because the brake system is set too tight. To fix this, have the brake system adjusted.
What to do if my AL-KO Lawn Mower has little or no weight compensation?
If your AL-KO Lawn Mower has little or no weight compensation, the gas spring might be too weak or defective. Have the gas spring replaced to resolve this issue.
Why is the handbraking action too weak on my AL-KO Lawn Mower?
If the handbraking action of your AL-KO Lawn Mower is too weak, it could be due to a defective gas spring. To solve this, have the gas spring replaced.
How to fix a stiff IBS height adjustment on my AL-KO 352 VB2?
If the IBS height adjustment on your AL-KO Lawn Mower is stiff, it may be due to blocked joints of the steering rod or a blocked adjustment support. To resolve this, loosen, clean, and grease the joints.
Why is the IBS height adjustment unstable on my AL-KO Lawn Mower?
If the IBS height adjustment on your AL-KO Lawn Mower is unstable, it could be because the joints of the steering rod are loose. Clean and grease the joints to fix this.
General| Engine Power | 2.0 kW |
|---|---|
| Cutting Width | 35 cm |
| Cutting Height Adjustment | Central, 6-stage |
| Weight | 23 kg |
| Cutting Height | 25-75 mm |
Explains symbols used in the manual for better understanding.
Describes the inertia braking system (IBS) and its function.
Specifies the approved weight ranges and intended application for the IBS.
Warns against incorrect usage to prevent accidents and damage.
Provides critical safety warnings and guidelines for handling the equipment.
Instructions for routing and attaching the breakaway cable to the towing vehicle.
Step-by-step guide to adjust the inertia braking system.
Guidelines for installation, meeting directive requirements.
Scheduled maintenance tasks and preventive measures for longevity.
Information on authorized service stations and recommended spare parts.
Table of common faults, their causes, and recommended remedies.
To Next Page
