Alamo Industrial RX72 User Manual

©2012 Alamo Group Inc.
Published 10/12 Part No. 00785503C
OPERATOR’S MANUAL
ALAMO INDUSTRIAL
®
1502 E. Walnut
Seguin, Texas 78155
830-372-3551
E-mail: parts@alamo-industrial.com
This Operator's Manual is an
integral part of the safe operation of
this machine and must be
maintained with the unit at all times.
READ,
UNDERSTAND, and
FOLLOW the Safety and Operation
Instructions contained in this
manual before operating the
equipment. C01-Cover_A
Important Operating
and Safety Instructions
are found in the Mower
Safety Video that can
be instantly accessed
on the internet at:
www.algqr.com/ave
$0.00
RX60/72/84
ROTARY MOWER
RX60/72/84

Alamo Industrial RX72 Specifications

General

Brand	Alamo Industrial
Model	RX72
Category	Lawn Mower
Language	English

Summary

Safety Section

General Safety Instructions and Practices

Provides fundamental safety guidelines for equipment operators and owners.

Operator Safety

Details essential personal protective equipment and safe operating habits for the operator.

Connection or Disconnecting Implement Safety

Outlines procedures and precautions for safely connecting and disconnecting implements.

Crushing Hazards

Warns about risks of being crushed by the tractor, implement, or falling components.

Thrown Objects Hazards

Addresses the danger of objects being thrown by the mower and necessary precautions.

Run Over Hazards

Highlights risks associated with falling off the tractor or being run over by equipment.

PTO Entanglement Hazards

Details dangers of entanglement with PTO drivelines and rotating components.

Mower Blade Contact Hazards

Warns about the severe risks of contact with rotating mower blades.

High Pressure Oil Leak Hazards

Explains the dangers of high-pressure hydraulic oil leaks penetrating skin.

Electrical & Fire Hazards

Covers risks related to electrical contact, gas lines, and fire prevention.

Transporting Hazards

Provides safety guidelines for towing and transporting the tractor and implement.

Hazards with Maintenance of Implement

Outlines hazards and safety procedures during maintenance and repair tasks.

Decal Location and Description

Illustrates the location and describes the purpose of safety decals on the equipment.

Introduction Section

Equipment Specifications

Provides detailed technical specifications for different mower models.

Key Operation Points

Highlights crucial aspects for efficient and proper mower operation.

Warranty Information

Details the limited warranty terms and conditions for the mower components.

Assembly Section

Dealer Setup Instructions

Guidance for dealers on preparing the mower for sale and customer delivery.

Pull Type (RX84 Only) Instructions

Specific assembly steps for the pull-type RX84 mower model.

Shield Assembly (All Models)

Instructions for attaching protective shields to all mower models.

Tail Wheel Installation (Model RX60 & RX72)

Steps for installing the tail wheel assembly on RX60 and RX72 models.

A-Frame Installation (Quick Hitch)

Procedure for installing the A-frame with a quick hitch for RX60 & RX72 models.

A-Frame Installation (Model RX84)

Procedure for installing the A-frame assembly on the RX84 model.

Driveline Attachment

Instructions on how to properly attach the driveline to the mower.

Axle Assembly

Steps for assembling the rear axle components of the mower.

Hydraulic or Manual Lift (Model RX84 Only)

Installation guide for the hydraulic or manual lift system on RX84 models.

Front and Rear Deflectors (Standard Equipment)

Instructions for attaching standard front and rear deflectors.

Chain Guards (Optional Equipment - All Models)

Guidance on installing optional front and rear chain guards.

Offset Adapter Hitch (Extra Equipment)

Instructions for installing the optional offset adapter hitch.

Operation Section

Operation Instructions

General guidelines and warnings for the safe and proper operation of the rotary mower.

Operator Requirements

Defines the qualifications and responsibilities of a safe mower operator.

Tractor Requirements

Specifies the necessary capabilities and features for a tractor used with the mower.

Tractor Horsepower

Details the minimum horsepower requirements for tractors based on mower model.

3-Point Hitch

Information on the tractor's 3-point hitch category and pin requirements.

Power Take Off (PTO)

Explains PTO speed requirements and connection procedures for safe operation.

Getting On and Off the Tractor

Provides safe procedures for mounting and dismounting the tractor.

Connecting the Mower to the Tractor

Detailed steps for safely connecting the mower to the tractor hitch.

Setting the Mower

Guidance on adjusting the mower's cutting height and pitch for optimal performance.

Driveline Length Check

Instructions for inspecting and ensuring correct driveline length and engagement.

Pre-Operation Inspection and Service

Essential pre-operation checks for the tractor and mower to ensure safe operation.

Driving the Tractor and Implement

Safe practices for driving the tractor with an attached implement, including speed and turns.

Operating the Tractor and Implement

Safe operation procedures, including hazard awareness and environmental checks.

Disconnecting the Mower from the Tractor

Steps for safely disconnecting the mower from the tractor hitch.

Mower Storage

Recommended procedures for properly storing the mower at the end of the season.

Transporting the Tractor and Implement

Safety guidelines and precautions for transporting the tractor and implement.

Trouble Shooting Guide

Common operational problems and their suggested solutions for the mower.

Maintenance Section

Hazards with Maintenance of Implement

Identifies hazards associated with performing maintenance on the implement.

Lubrication

Provides instructions and schedules for lubricating mower components.

Gearbox Servicing

Detailed procedures for servicing the mower's gearbox (Models RX60, RX72, RX84).

Driveline Lubrication

Guidance on lubricating the mower's driveline U-joints and telescoping tubes.

Lift Type Driveline & Pull Jackshaft Shields

Information on servicing and inspecting shields for lift type and pull jackshaft drivelines.

CV Type Driveline

Details regarding the CV type driveline and its safety shield.

Blade Servicing

Instructions and warnings for inspecting, replacing, and maintaining mower blades.

Blade Sharpening

Procedure for sharpening mower blades while maintaining balance.

Blade Carrier Installation

Steps for correctly installing the mower blade carrier and associated hardware.

Slip Clutch

Information on the slip clutch, its function, adjustment, and maintenance.

Seasonal Clutch Maintenance

Procedure for maintaining the clutch after periods of inactivity or exposure.

Proper Torque for Fasteners

Provides torque specifications for various fasteners used on the mower.

Gearbox Disassembly

Step-by-step instructions for disassembling the mower gearbox.

Right Angle Gearbox Assembly & Disassembly Procedures

Detailed procedures for disassembling and assembling the right angle gearbox.

Assembly Procedure (Gearbox)

General steps for reassembling the gearbox after disassembly.