2.3.c Installation
• Theradiomustbeinstalledandremovedbyqualiedtechnicians
only. The information provided in this manual is intended to as-
sist installers who shall however be fully responsible for damages
resulting from an improper installation.
• This transceiver generates and irradiates RF electromagnetic
energy and must therefore be installed and used in accordance
with the instructions provided in this manual and provided for in
current laws. Failure to do may cause injuries to people and/or
serious damage to the unit.
• Always verify that the installation fully complies with the require-
mentsconcerningtheexposuretoradiofrequency.Unauthorized
changes or alterations may invalidate the compliance with stand-
ards. All changes and variations shall have to be approved in
writing by the manufacturer.
• Always verify that the power supply meets the specications
given in this manual. In doubt, always contact the dealer for as-
sistance.
This product is compliant with the requirements of Directive 89/336/
EEC and 73/23/EEC of the European Council concerning the ac-
knowledgement of laws related to electromagnetic compatibility and
low voltage in Member Countries, and with the Automotive Directive
72-245-EEC,asamendedbyDirective2004-104-EEC.
2.4 Technical Support
Please write the serial number of your transceiver in the space pro-
videdbelow.Thisnumberisprintedontheidenticationlabelofthe
transceiver and must be provided for technical support and/or in the
event of loss and/or theft of the unit.
Serial number_______________________
To Next Page